What is a flex Io?

FLEX I/O is a Distributed I/O System that connects to several Networks including EtherNet/IP, ControlNet and DeviceNet. FLEX I/O offers all the functions of larger, rack-based I/O without the space requirements. Independently select the I/O, termination style, and network to meet your application needs.

How do you change the IP address on a 1794 Aentr?

Right-click on the module in the RSLinx Classic “RSWho” browse and select “Configure Module”. If the module is a Series B module with a three-digit numeric selector switch and the value is set to between 1 and 254, then the module address is 192.168.

What Aentr 1794?

Cat #: 1794-AENTR. UPC: 885630106144. Communications Adaptors, Dual Port, Flex I/O, Ethernet/IP, 8 Modules, 24 Volt DC, 640 mA, 7.3 Watt.

How do I reset my AENT 1794?

To reset a 1794-AENT to factory defaults, set the switches to “888” and cycle power. Once you’ve set up the module to your desired IP address using DHCP, you can de-select DHCP, move the switches back to 999, and it will use the address you’ve configured.

What does the 1794 Flex I / O system do?

1794 FLEX I/O OverviewFLEX™ I/O offers: FLEX I/O is a Distributed I/O System that connects to several Networks including EtherNet/IP™, ControlNet®, and DeviceNet®. Flexible, low-cost, modular I/O for distributed applications. FLEX I/O offers all the functions of larger, rack-based I/O without the space requirements.

Which is Allen Bradley Flex I / O 1794-aent?

The Allen-Bradley 1794-AENT is a FLEX I/O dual-port Ethernet/IP redundant media adapter module. Eight I/O modules can be supported by this adapter module. It has a current load of 450 mA at a 24 Volts power supply and the nominal power supply input voltage is 24 Volts DC. A 10 to 100 Mbps communication rate is present with this module.

How does a Flex I / O communication adapter work?

A FLEX I/O™ adapter module interfaces FLEX I/O modules to an I/O scanner port across a communication network. The FLEX I/O adapter module contains a built-in power supply that converts 24V DC to 5V DC necessary to transfer and receive all the I/O data and configuration for the entire rack. Your 1794 FLEX I/O system can communicate on:

How many ports does the Allen Bradley 1794 I / O adapter have?

It also operates with a 18A for 2 ms Inrush Current and a None (open-style) Enclosure Type Rating. The Allen-Bradley 1794-AENTR Flex I/O Dual Port Ethernet/IP Adapter Module has a 8 Modules I/O Capacity, a 10/100 Mbps Communication Rate, and a 19.2-31.2V DC Input Voltage Range nom..