Other

Does Edelbrock rebuild carbs?

Does Edelbrock rebuild carbs?

See all 22 photos Edelbrock’s rebuild kit comes with everything needed to freshen a tired carburetor—gaskets, needles, seats, accelerator pump, and more. See all 22 photos With the carb top removed, the main jets (1) and the secondary jets (2) can be seen.

How much horsepower does a Edelbrock carburetor add?

After you fix what’s limiting performance, an Edelbrock Performer intake can add as much as 10 HP.

What do Edelbrock step up springs do?

See all 15 photos Here one of the step-up springs can be seen. The springs push the pistons up and manifold vacuum pulls them down. The springs determine when the metering rods change from cruise to power and back.

Where can I get an Edelbrock carburetor calibration kit?

They are available online or in the orginal tuning book supplied with the carburetor. When you order your Edelbrock carburetor you shouldn’t think twice about the calibration kit, this is part number 1487 for the 1406 600cfm carb. It includes an assortment of rods, jets, and springs. Shown are typical metering rods for the EPS carburetor.

How to rebuild an Edelbrock or Carter AFB carburetor?

Get out the tools and let Kyle Smith walk you through rebuilding your Edelbrock or Carter AFB. In part 1 of a two-part DIY, we go through full disassembly and share tips for getting stubborn carbs dismantled and identifying parts so that even if you’ve never had to adjust the choke, you can tear down and prepare your carburetor for reassembly.

How is an EPS carburetor different from an Edelbrock?

The design of the EPS carburetor allows adjustment of both part throttle modes by calibrating the Primary Metering. Unlike other carburetor designs, in an Edelbrock carburetor this can be achieved without affecting Secondary Metering, or the WOT system.

What causes throttle drivability on an Edelbrock carburetor?

It is clear to see then how the use of different sized rods and jets can change the amount of fuel delivered, and the use of heavier or lighter springs can effect at what vaccuum the fuel is delivered. Most part throttle drivability problems with an Edelbrock carburetor are attributed to poor primary metering calibration.