What causes a Kenmore washing machine not to spin out?

If the clutch is worn out, it may prevent the tub from spinning. If the clutch band kit is worn out, replace it. The drive pulley connects to the washer drum and works with the drive belt and motor to rotate the drum. If the drive pulley is worn out, the drive belt might slip off, preventing the washer from spinning.

Why is my washer not spinning my clothes dry?

When your washer will not spin dry your clothes, the debris filter or coin trap may be blocked. Your washer has a filtering device down and near the pump called a drain filter or a coin trap. This filter grabs all foreign objects that go down and into the drain.

Why is my washer not spinning or draining?

If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.

Why won’t my Kenmore washer spin?

Kenmore washer. If the washer won’t spin or agitate its a good chance the coupler is broke. If the lid switch is bad your washer won’t spin, but the motor also won’t hum.

What causes the washing machine to not spin?

How to Repair a Washing Machine That is Not Spinning Fast Enough Check to see if the washer is overloaded. Modern washing machines have automatic shut-off devices for out-of-balance loads. Make sure the water is draining properly. If the water does not drain out, then it could cause the washing machine not to spin. Check to see if any belts have came off or are loose.

Why is my Kenmore washer not draining?

When a washer won’t drain, it’s usually because there’s a clog or the pump is broken. If you figure out what’s causing the issue, you may be able to fix it yourself. To find out what’s preventing your washer from draining, you’ll need to access the parts of your machine to check for damage or clogs.

Why is washing machine not working?

A common cause of a washing machine not taking any water in is either a kinked fill hose, or the tap becoming faulty. Some taps can become clogged up, others can jam inside. You turn it on but unbeknown to you, the valve inside doesn’t turn.