How do you connect a drain hose to a standpipe washing machine?
How do you connect a drain hose to a standpipe washing machine?
Insert the end of the washer drain hose no more than 8 in. into the standpipe and strap the hose in place with tape or wire. If the machine drains to a laundry sink, hook the drain hose over the side and secure it in place. Thread the water supply hoses onto the inlet valves by hand (above).
How do you plumb a standpipe?
Need to Install a Standpipe? Here’s how:
- Choose a seamless PVC or steel pipe with the appropriate threaded NPT fitting to mount the ultrasonic sensor.
- Cut the end of the standpipe at a 45° angle.
- Place the pipe as vertical as possible with an unobstructed path to the target.
- Mounting the pipe is the toughest part.
What does a standpipe adapter do?
Standpipe Adapter Specifications This part helps stop the washer from overflowing.
What is the proper washing machine installation standpipe height?
Washing Machine Drain Hose Backflow Prevention Proper Standpipe Height. Most washing machines require a standpipe with a height of at least 36 inches. Drain Hose. The washing machine drain hose must be maintained if backflow and other drainage issues are to be avoided. Clogs and Stops. Drain Vent.
What size pipe is needed for a washing machine?
should be 2 inches in diameter.
What is a washing machine stand pipe?
Washing machines drain into what is called a standpipe. A standpipe is a vertical piece of pipe with an elbow on the bottom. The elbow remains filled with water, preventing sewer gas from backing up into your laundry area.
What causes a washing machine to overflow?
One of the most common reasons for your washing machine drain to overflow is caused by a clog in the drain standpipe.