How can you tell good weld from bad weld?

Signs of a good oxyacetylene weld include a uniform bead with no holes or globules of melted metal. A poor-quality oxy weld will have holes and lack uniformity. You’ll also find insufficient penetration of the workpieces. Additionally, there could be large globs of melted metal on and around the weld.

How can you tell a good welder?

Inspection After Welding

1. Check weld against code and standards.
2. Check size with gauges and prints.
3. Check finish and contour.
4. Check for cracks against standards.
5. Look for overlap.
6. Check undercut.
7. Determine if spatter is at acceptable levels.

Can you weld over a bad weld?

yes you can weld over an existing weld… but lots of factors come in play if you want it to be successful.

Why do my welds look burnt?

Causes: Excessive heat is the primary cause of burn through. Having too large of a root opening on the weld joint can also result in burn through. Cures: If burn through occurs, lowering the voltage or wire feed speed can help rectify the problem.

What are the pros and cons of being a welder?

Pros and Cons of Being a Welder Pro: There are a variety of different aspects of the profession to enter. Con: Welding isn’t without its dangers and discomforts. Pro: There are different ways to become certified. Con: You may face long hours and lots of traveling. Pro: You can make good-to-great money.

Why is welding bad?

Welding is dealing with heat and this heat produces some sparks and toxic fumes. These fumes may cause corneal damage . When you’re joining the two metal the sparks spreads. Looking at those horrible sparks for a long time may interrupt your watching.

What should a weld bead look like?

From a cross section point of view, the bead weld looks like a round deposit. A welder might need to create several welding beads to completely seal the two base materials together. Advanced temper bead welding and bead welding techniques produce a finished product that resembles overlapping coins or disks.