Users' questions

What is canon error B200?

What is canon error B200?

The dreaded B200 Error on your Canon Printer usually indicates that the print head has died!

How do I clear the fault on my canon printer?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

What to do if canon mx860 repeats B200 error code?

Re: Canon MX860 repeats B200 error code — brought it back to store , they couldn’t fix it. 11-13-2012 10:30 AM Please try the following to see if we can resolve your issue: 1. Open the cover of the printer. 2. Remove all ink tanks from the printer. 3. Lift up the gray locking lever on the side of the ink tank holder. 4.

How to solve the canon B200 printer error?

How to solve the Canon B200 printer error: In most cases replacing empty ink tanks and cleaning the printhead solves the B200 error on a canon printer – but: this might void the warranty, everything you do happens at your own risk! If you are unsure you might want to contact the Canon support team first! Loading…

What to do if you get an error on your Canon printer?

Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes. 9. Plug the power back in and turn the printer on. If the error persists, please contact a technical support representative at 1-800-652-2666 between the hours of 10 AM and 10 PM, EST, Monday – Friday for additional help with this error.

How to fix canon ip8500 inner cover door open?

Please try the following to see if we can resolve your issue: 1 Turn the printer off. 2 Unplug the power from the printer for at least 5-10 minutes. 3 While unplugged, remove any paper from the unit. 4 Double check for any obstructions found in the unit or paper paths. 5 If no obstructions are found, plug the power back in and turn the unit on.