Users' questions

How do I setup my TL WA7210N?

How do I setup my TL WA7210N?

Configure TL-WA7210N as AP mode.

  1. Click on Operation Mode on the left side.
  2. Go to Wireless ->Wireless Settings on the left menu.
  3. Go toWireless – Wireless Securityto configure the wireless password for the local wireless network.
  4. Go toSystem Tools – Reboot to reboot the device or the settings will not take effect.

How do I setup my tp-link router without cable?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I setup my tp-link outdoor access point?

Connect your TP-Link router to your main router using Ethernet. Power your TP-Link router on and let it communicate with your main router. Once the link light goes green, you have a connection and are ready to configure. Connect a computer directly to the TP-Link router using Ethernet.

How do I log into my router TP-Link?

Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168. 1.1). Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.

Is TP-Link wireless?

TP-Link powerline adapters Every single adapter acts as a portable LAN port, providing stable, ultra-fast internet to every room as long as there is a power socket on the same circuit. Some can also transmit wireless networks while providing wired connectivity. No drilling or wire installation required.

What is Access Point mode?

Access point (AP) mode enables your router to function as a gateway for wireless devices to connect to. In AP mode, your NETGEAR router extends your existing WiFi instead of creating a new WiFi network. Note: Router features like DHCP and port forwarding are disabled while in AP mode.

Can I have 2 TP links?

Q: Can several Powerline networks exist simultaneously in same power circuit? A:Yes. The Powerline networks can be separated by different network names. To change the network name, it can be done through the pair button or attached Utility.

Can you link TP links together?

Press the pair button on the main adapter for 1 second. Within 2 minutes, press the pair button on the second adapter. After they’ve been linked, you can simply plug the second adapter into any socket in your house.

Why can’t I log into my TP-Link Router?

Or you can refer: What can I do if I forget the login password of TP-Link Wireless Router? Restart the TP-Link device. A simple restart by pushing the power off and on the button will not bring any harm. Usually, there is a reset button/hole on the TP-Link device, push it for a few seconds can factory reset it.