What approved document of the Building Regulations relates to fire safety?

Summary. Approved Document B addresses fire safety precautions which must be adhered to, to ensure the safety of occupants, firefighters and those close to the building in the event of a fire.

What is the purpose of Approved Document B?

The approved documents provide guidance for satisfying the requirements of the building regulations in common building situations. Part B of the building regulations in England covers fire safety matters within and around buildings.

What is Part B of building regulations?

Part B of the Second Schedule to the Building Regulations is therefore primarily concerned with the health, safety and welfare of persons. The fire safety measures outlined in this guidance document are intended for the protection of life from fire.

Which approved document is related to the installation of smoke and fire alarms?

If installing a smoke and heat detection system, this will need to conform to BS EN 14604:2005 for smoke and heat alarms or BS5446-2:2003 for fire detection and fire alarm devices.

Who is covered in the fire safety legislation?

Who does it apply to? The Order applies to almost all buildings, places and structures other than individual private homes – that’s individual flats in a block or family homes. Other places covered by the Order include shared areas in houses in multiple occupation (HMOs), blocks of flats and maisonettes.

What is Part L building regulations?

Part L is a building regulation that concerns construction projects that are new, or result in the change of use of a dwelling or all other buildings in England. It sets the standards for the energy performance and carbon emissions of new and existing buildings.

What are the changes to Approved document B?

Any flats greater than 11m storey height, guidance now requires sprinklers throughout the building. Corridors and common areas in the same building do not need to contain sprinklers providing they are fire sterile. This is set out in Paragraph 7.4 in Approved Document B.

Does Approved document B apply to existing buildings?

The Approved Document can be downloaded below, with Volume 1 covering dwellings, including blocks of flats and Volume 2 covering buildings all other types of building covered by the building regulations. …

What is Building Regulations Part P?

Part P forms part of the Building Regulations. The principle of the Building Regulations is to ensure that consistent standards are applied to the construction of buildings including its structure, fire safety, sound insulation, drainage, ventilation and electrical safety.

Do smoke detectors need to be linked?

1.13 Where more than one smoke alarm is installed they should be linked so that the detection of smoke by one unit operates the alarm signal in all of them. The manufacturers’ instructions about the maximum number of units that can be linked should be observed.

Do wireless smoke alarms meet building regs?

All alarms should be interlinked (either using hard wiring or wireless interlink) to ensure audibility throughout the property in the event of an alarm being activated. However the Building Regulations also reference the British Standard BS 5839-6:2013 (also known as BS 5839: Pt.

When was approved Document B for fire safety published?

First published 7 December 2010. The Approved Document can be downloaded below, with Volume 1 covering dwellings, including blocks of flats and Volume 2 covering buildings all other types of building covered by the building regulations. Additional guidance can be found at the foot of the page. Approved Document B: Fire Safety Volume 1: Dwellings.

How big is part B of fire safety?

This version does not incorporate the changes made as a result of the Building Regulations 2010. Approved Document B – Fire Safety (2000 Edition – incorporating the 2002 European amendments) (PDF 9771 Kb)

What is part B of the building regulations?

Part B of the Building Regulations sets out the requirements for fire safety and Approved Document B (‘ADB’) provides guidance with respect to those requirements.

What was the purpose of building fire safety regulation 1991?

Building Fire Safety Regulation 1991 (a) was at any time required to be maintained in the building under any Act, including as a prerequisite to the granting of an approval or the issue of a notice, certificate or instrument; and (b) was not at any time authorised under any Act to be no longer maintained. (2) For the purpose of this section—