How do I setup my Belkin wireless router?

General Belkin Router Configuration

1. Visit the router’s IP address (http://192.168.2.1) in a new browser window.
2. Click on DNS under Internet WAN.
3. Enter the router’s password and click Submit.
4. Uncheck Automatic from ISP and type in OpenDNS addresses in DNS Address and Secondary DNS Address.
5. Click Apply Changes.

How do I get my Belkin wireless router to work?

Troubleshooting internet connection problem with your router. Unplug the modem, the router and the computer (in that order) from their respective power outlets then wait for 30 seconds before plugging them back. Re-plug the modem first followed by the router and then the computers.

How do I setup my Belkin N300 Wireless Router?

Setting up the Belkin N300 Wi-Fi N Router, F9K1010 v2

1. Unplug the modem from the power source and connect the router to the modem.
2. Look for your router’s wireless network name (SSID) and connect a computer (or phone/tablet) using the password provided.
3. NOTE: The default wireless network name (SSID) is belkin.

How do I setup my Belkin n600 router?

1. 1 . Connect your Router’s Ethernet cable to your modem’s Ethernet port (on the back of your modem) .
2. 2 . Plug the Router’s power supply into a wall outlet .
3. 3 . Put the CD into your computer .
4. 4 . Click the Setup icon on the CD menu .
5. 5 .
6. 6 .
7. 1 .
8. 2 .

How do you login to a Belkin wireless router?

Login To Your Belkin Wireless G Router. Step. Use an Ethernet cable to connect your computer to back of your Belkin Wireless router. Use any of the four ports labeled LAN at the back of your router. Open a web browser, such as “Firefox,” “Safari” or “Internet Explorer.”.

How do I make Belkin router secure?

If you just configured your brand new Belkin router, you need to secure the wireless network by editing the default security settings of the router. You can quickly access the security settings by navigating to the device’s Web interface. After you secure the network, you need to prevent access to the router by creating a password.

What is the WEP key to a Belkin router?

A WEP key is a Wired Equivalent Privacy code number used to gain access to a protected network, typically a Wi-Fi network in a home or office. Belkin and other router manufacturers employ WEP technology and other standards in order to keep networks secure and safe from unauthorized access.

Are Belkin routers good?

For some people, yes, that would be a good router for them. Technically speaking, a Belkin router for a SOHO solution is typically just fine and with that level of tech, you get about 5–10% failure rate.