How can I clean my PS3 without taking it apart?

How can I clean my PS3 without taking it apart?

Your best bet would be to get a keyboard duster or “canned-air” as I call it, and blow in the back, front, and side vents of the PS3. This should dislodge most if not all the major dust inside the system. Keep a vacuum nearby to suck the large dust clumps that come out.

How do you clean an original PS3?

Clear dust out of the power supply with compressed air and paper towels. Wipe away any visible dust with a dry paper towel. Use a can of compressed air with a thin nozzle attachment to spray air in the hard-to-reach areas and blow out the dust or grime.

What should I do if my PS3 wont turn on?

NO 1 Make sure the PS3 is off but still has power going to it. 2 Hold down the power button until the PS3 turns on then back off. 3 Release the button once it has turned off. 4 Hold down the power button again until you here 1 beep & then 2 more beeps. 5 Connect your controller with a USB lead & select which option you require. More

How to unplug power cable on PS3 Slim?

Hold down the eject button and then flip the switch back on. If you have the PS3 Slim you need to unplug the power cable from the system. Hold down the eject button and then plug the cable back in.

What’s the best way to disassemble a PS3?

Opening the PS3. Disconnect the PS3. Before opening the system up, make sure that you have disconnected the power cable and the video cable, as well as anything plugged into the USB ports. Like working with any other piece of sensitive electronics, ground yourself before working on the innards.

How do you remove power supply from PS3?

Remove the power supply. The power supply is the silver or black box next to the Blu-ray drive. Remove the five screws that hold in the power supply. Detach the plugs on both sides of the power supply. Pull the power supply directly out of the unit. Remove the wireless card.