How do you fix there is a problem with the printhead?

How do you fix there is a problem with the printhead?

How do you fix a printhead problem?

  1. Clean the printhead. First, you will have to press the Power button to turn off the printer.
  2. Restart the printer. First, you will have to turn on the printer and wait until the printer is idle and silent.
  3. Replace the printhead.

Why does my printer say problem with printhead?

HP printheads clog periodically as small amounts of ink or dust dry up and collect in the nozzle. Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use.

Why is my hp 88, 88xl ink cartridge not working?

Your printer/computer may display an HP 88, 88XL ink cartridge alert message, such as “non-genuine cartridge”. Press proceed/continue/accept/yes/OK to dismiss this prompt. If any streaks or missing colors appear on prints the cartridge may be suffering from an air bubble within the internal ink spout.

How to fix missing printhead on HP printer?

How To Fix Hp Printer Missing Or Failed Printhead Error? Solution 1: Reset The Printer. One of the simplest solutions you can try to solve the printer error is to reset the… Solution 2: Check Ink Levels. While the printhead is responsible for spraying the ink on the paper, the failed printhead…

How to fix a broken hp 88 or 940 printhead?

HP 88 and 940 printheads are notorious for failing due to air getting in. This video will show you how to use a printhead priming tool to eliminate all air from your printhead and get it functional again. Repair your perfectly good printhead instead of spending $60-70 on a new one! Loading…

Why do I get an error on my HP printer?

Check if the error persists after reseating the printhead. If the printheads were misaligned or became loose, it might be the reason why you were unable to print and getting the error. If the solutions provided above did not help you, there might be some hardware issue that needs to be resolved.