How do you determine water softener size?

To determine the appropriate water softener size for your home, multiply the number of people in your home by the gallons of water they use each day (80 gallons per person is the average). Multiply that number by the grains of hardness in your water to figure out how many grains need to be removed each day.

How do you size a commercial water softener?

Other factors you need to take into consideration when sizing a commercial water softener include water pressure, the hardness of your water, the temperature of the water, the capacity per cubic foot of resin that each water softener tank can hold, the desired hours between regenerations, and the amount of space you …

How big is a water softener unit?

Most homes only need a 32,000-grain water softener unit or one cubic foot of resin. However, there are instances where a larger capacity of a water softener is required – a large family with six or more occupants or a large house with 4000 or more square feet.

How much space does a water softener need?

How Much Space Is Needed for a Water Softener System? Softeners don’t take up too much space! You can expect to use about a 2ft x 3ft footprint for a standard softener with a brine tank.

Which is better tapworks ad11 or tapworks softener?

This means that AD11 is better for people located in the UK. As a UK based customer, you should consider buying a Tapworks AD11 for the following reasons: It can deal with very hard water and provide enough soft water for the average family of 2-4 people.

How to properly size a water softener-aquatell?

Daily Softening Requirement = 10 grains per gallon X 300 gallons per day = 3000 grains per day. In the example above, the softener will be removing 3000 grains per day. A softener is usually sized to regenerate about once per week. Selecting a Softener To Match Your Conditions

How big is a standard water softener tank?

As for the size of the tank, units possessing the capacity range mentioned above (32,000 GR – 64,000 GR) typically range in size from 9” in diameter and 48” in height to 12” in diameter and 52” in height.

When to increase the size of a water softener?

Once you get over 10 gpg (171 ppm) hardness, you should go up a size of water softener. Once you get over 20 gpg (342 ppm) hard water, you should go up another size and so on, so that you know the unit will be efficient and not use too much salt and water to clean itself.