How do I reset my Samsung CLP 300?

How to Reset the Samsung CLP-300 Printer

1. Push the power button to turn off the power to your Samsung CLP-300 printer.
2. Unplug the power cord from the wall outlet, then from the back of the printer.
3. Press and hold “Stop” until the printer starts printing a test page.

How do I troubleshoot my Samsung printer?

Check if your Samsung printer is detected

1. Open your Start menu and proceed to Settings.
2. Click on Devices and select Printers & Scanners.
3. Check if you can see your printer in the list of available devices.
4. If not, click on Add a printer or scanner.
5. Wait until your OS locates the desirable printer.

How to troubleshoot a Samsung clp-300 printer?

Remove paper tray. Turn printer on it’s backside so you can access the underbelly. Locate small roller. Clean roller … or … rough up roller with abrasive material like sand paper. There are problems with the way your document looks. Follow these steps to replace the Fuser Unit. Follow these steps to replace the Toner Roller (Guide).

Is the CLP 300 a trademark of Samsung?

• CLP-300 and CLP-300N are model names of Samsung Electronics Co., Ltd. • SAMSUNG and Samsung logo are trademarks of Samsung Electronics co., Ltd. • Apple, TrueType, Laser Writer, and Macintosh are Trademarks of Apple Computer, Inc.

What to do if waste toner is missing from Samsung clp-300?

Open front panel and back panel. Dislodge any sheets of paper you find. Push front panel to assure it’s clips are engaged. If waste toner is missing, you will need to insert a new one. Empty the Waste Container (Guide?).

Why does Samsung CPL 300 red light come on?

Samsung CPL 300 red comes on immediately after initial switch-on. Noticed that toner waste sensor light might be broken….does that have an effect or can it be simply be bypassed thankyou The toners are full and no paper jam . The front cover is tight. The waste tank is OK.