Which pump used the swash plate?

Which pump used the swash plate?

axial piston pump
The axial piston pump drives a series of pistons aligned parallel with a shaft through a swashplate to pump a fluid. A common example of a swashplate application in a fluid pump is the compressor of a present-day automobile air conditioning system.

How does a swash plate motor work?

In a hydraulic motor, a swash plate aids in transforming the axial reciprocating motion of the axial pistons into rotary motion. Basically, the axial pistons move up and down, sliding along the angled surface of the swash plate. Note that the swash plate itself is stationary — it does not turn.

What is the use of swash plate?

A swashplate is a device that translates input via the helicopter flight controls into motion of the main rotor blades. Because the main rotor blades are spinning, the swashplate is used to transmit three of the pilot’s commands from the non-rotating fuselage to the rotating rotor hub and mainblades.

What is a swash plate cam?

A swash plate cam is usually a disc that rotates around a shaft. The disc is set at an angle so that the follower moves up and down as the disc rotates. As the swash plate cam rotates the two roller followers rise and fall.

How swash plates work?

swash plate. ( General Engineering ) engineering a collar or face plate on a shaft that is inclined at an oblique angle to the axis of rotation and either imparts reciprocating motion to push rods parallel to the shaft axis as in a swash plate pump or, conversely, converts reciprocating motion to rotation as in a swash plate motor.

What is axial piston hydraulic pump?

An axial piston pump is a positive displacement pump that has a number of pistons in a circular array within a cylinder block. It can be used as a stand-alone pump, a hydraulic motor or an automotive air conditioning compressor.

What is a bent axis pump?

Bent Axis Pump (from Internet Glossary of Pumps) Bent Axis Pump. In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve.

How does an axial piston pump work?

Axial piston pumps have a circular piston group which rotates against an angled swash plate. As the rotary group turns the pistons are pushed forwards and backwards. A grooved timing plate at the at the top of the pistons controls the way the fluid is drawn through the suction side of the pump and out through the pressure side.