# What does IMP mean on electric meter?

## What does IMP mean on electric meter?

Imp/kWh is short for Impressions per kWh (unit) of electricity which passes through the meter where one ‘impression’ is a brief flash of an LED. The majority of meters are labelled 1000 Imp/kWh which means that the LED will flash 1000 times for each kWh of electricty which passes through.

## What is the meaning of 1600 IMP kWh?

Once that is done, say you set it up for 1600 imp/kWh, this means that every 1600 impulses corresponds to 1 kWh of energy consumption measured by the meter.

What is impulse kWh?

The impulse/kWh is defined by your device configuration. For example, under the operating conditions SCF = 0, S0=S1=1, you should have: CF = 2048*(F1,F2) F1-4=6.86kHz. Frequency at F1/F2 is F=515.85*V1rms*V2rms*F1-4/(Vref^2)=515.85*V1rms*V2rms*6.86k/(2.5^2)

### What is one kilowatt hour or one unit?

The kilowatt-hour (SI symbol: kW⋅h or kW h; commonly written as kWh) is a unit of energy equal to 3600 kilojoules (3.6 megajoules). The kilowatt-hour is commonly used as a billing unit for energy delivered to consumers by electric utilities.

### Which is the first part of is 1200?

IS 1200 ( Part 1 ) : 1892 Indian Standard METHODS OF MEASUREMENT OF BUILDING AND CIVIL ENGINEERING WORKS PART 1 EARTHWORK ( Fourth Revision ) First Reprint MAY 1994 UDC 69.003.12:69.021.13:624.13 Q BIS 1992 BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG NEW DELHI 110002

Which is the best definition of the IMP?

Definition: The IMP comprises a hierarchy of program events, in which each event is supported by specific accomplishments, and each accomplishment is based on satisfying specific criteria to be considered complete.

#### What does imp mean in the DoD environment?

If used in a civil agency environment, the term “IMP” must be a mutually agreed definition. In the DoD environment, the IMP normally is a bilateral agreement between the government and a contractor on what defines the “event-driven” program.

#### What are the rules of the is 1200 standard?

IS 1200 ( Part 1 ) : 1992 METHODS OF MEASUREMENT OF BUILDING AND CIVIL ENGINEERING WORKS- PART 1 EARTHWORK C Fourth Revision ) 1 SCOPE This standard (Part 1 ) covers the method of measurement of earthwork in building and civil engineering works. 2 GENERAL RULES 2.1 Clubbing of Items