# How does a robot solve a maze?

## How does a robot solve a maze?

One of the simplest ways of solving a maze with a robot is by using the Wall Follower algorithm, also know as the left-hand rule (or right-hand rule). One will get Sparki through the maze faster, but you’ll never know which one unless you’ve seen the maze before.

### Can you solve a maze by always turning right?

LPT: Always turn left/right when you are in a maze and you will find your way. If you always turn to the same direction, you will eventually find the exit or whatever the maze is about finding.

What type of sensor is used in maze solving robot?

Firstly, the maze solving vehicle is designed with three infrared sensors of which two is used for wall detection to avoid collision and the third is for obstacle detection for picking and placing the objects to clear its pathway with the help of robotic arm.

How do you solve a maze?

There is a simple method for finding your way out of a maze or labyrinth: Touch the wall or hedge with the hand nearest to it, left or right. Keep that same hand touching the wall and keep walking. This may take you on a horribly long route, but it will eventually get you out.

## How does a robot solve a maze problem?

Maze solving problem involves determining the path of a mobile robot from its initial position to its destination while travelling through environment consisting of obstacles. In addition, the robot must follow the best possible path among various possible paths present in the maze.

### Where are the headers on a maze solving robot?

Next solder a 9 pin strip of female headers on the left side of the board from pins labeled “5v” to “A0”. This will mate with the sensor plug later. Solder a 4 pin strip of female headers on the right side of the board from pins labeled “D5” to “D8”.

What kind of algorithm does a maze solver use?

WALL FOLLOWING ALGORITHM The wall follower, one of the best known rules for traversing mazes, is also known as either left-hand rule or the right-hand rule. Whenever the robot reaches a junction, it will sense for the opening walls and select its direction giving the priority to the selected wall.

How does a Micro Mouse solve a maze?

The maze solving robot — also known as a micro mouse — is designed to find a path without any assistance or help. As a type of autonomous robot, it has to decode the path on its own to solve the maze successfully. So it’s logic is quite different from the line following robot which follows a predetermined route.