What is the difference between a PF63 vs PF63E oil filter?

The older PF63 has a by-pass pressure of 12 PSI. The newer ecore PF63E has a bypass pressure of 22 PSI. If your application calls for the 63E and runs at a higher oil pressure, it’s possible the classic 63 might run with the bypass open, allowing unfiltered oil through. the pf63 is disc.

What does an ACDelco PF63E oil filter fit?

This filter fits your GM vehicle, as well as a wide range of other vehicles on the road today. Its unique element design yields more filtering area in a smaller canister.

What is the difference between PF48E and PF63E?

The PF48/PF48E has a pressure specification of 15 PSI (100 kPa) while the PF64/PF63E has a pressure specification of 22 PSI (150 kPa). Refer to the Electronic Parts Catalog (EPC) to determine the proper part numbers for a replacement oil filter.

How many microns is a good oil filter?

The typical economy-grade oil filter is going to have a 95 percent capture efficiency at 40 microns, with almost no performance at 10 microns or less.

What’s the difference between oil filter pf48 and pf64?

However, these oil filters are not the same and have different internal bypass valve opening pressure specifications. The PF48/PF48E has a pressure specification of 15 PSI (100 kPa) while the PF64/PF63E has a pressure specification of 22 PSI (150 kPa).

What’s the difference between a Delco oil filter pf63e?

Link below shows difference between PF63E and PF63. I’ll say up front ‘my preference’ would be for the classic construction PF63. That said, the newer ACDelco PF63E uses a poppet style bypass with the ecore nylon cage and the pleating looks relatively tight and uniform.

What is the GM part number for ph63?

For PH63 the non-ecore part number is 89017525 Non e-core The GM part number for the e-core filter is: 19330000 Ecore Why have a plastic center tube and soft fiber end caps if you don’t have to ?

Which is the best oil filter e or F?

Stay away from the E filter. I don’t know what the F filter is, but it sounds suspicious too. PF63 is the only ACDelco I’d recommend. Brand new truck ? Why not get a top notch filter ?