Is mixcraft good for recording vocals?

It’s extremely versatile voice recording software and performed well overall in our tests. Nevertheless, Mixcraft is great audio recording software loaded with plenty of useful and essential tools and a sleek, modern interface. The app comes in two versions, Recording Studio and Pro Studio.

How do you EQ vocals like a pro?

Best EQ Settings for Vocals

1. Roll off the low-end starting around 90 Hz.
2. Reduce the mud around 250 Hz.
3. Add a high shelf around 9 kHz & a high roll off around 18 kHz.
4. Add a presence boost around 5 kHz.
5. Boost the core around 1 kHz to 2 kHz.
6. Reduce sibilance around 5 kHz to 8 kHz.

How can I make my voice sound modern?

For a modern sound, the dynamics of vocals need to be super consistent. Every word and syllable should be at roughly the same level. Most of the time, this can’t be achieved with compression alone. Instead, use automation to manually level out the vocal. I prefer to use gain automation to create consistency before the compressor.

What’s the best way to make vocals sound professional?

Another way to give the vocal a bit of depth and shimmer is to apply subtle chorusing. Again, you don’t want the effect to be noticeable. Add a stereo chorus to the vocal and increase the wetness until you notice the effect, then back it off a touch. The vocals are extremely important and will require more time mixing than most other instruments.

What kind of boost do I need for my vocals?

Use a high shelf, and start with a 2dB boost at 10kHz. Experiment with the frequency and amount of boost. You can go as low as 6kHz (but keep it subtle) and boost as much as 5dB above 10kHz. Just make sure it doesn’t become too harsh or brittle.

How can I add more depth to my voice?

To add more width and depth to the vocal, try adding a subtle stereo plate on the vocal. You don’t want the reverb to be noticeable, as discussed in the previous tip. Instead, bring the wetness up until you notice the reverb, then back it off a touch.