How wide is a standard door frame in Australia?

820 mm
The standard door size in Australia The standard door width is 820 mm, but there are other popular sizes used: 720 mm, 770 mm and 870 mm. The standard thickness of the door is 35 mm. Most of the door frames are designed to carry up to 40 mm thick doors.

What size should a door opening be?

Framing rough opening sizes are really quite simple. Just add 2″ to the width of the actual door size. You should add 2-1/2″ to the height of the actual door. This will give you room to space the door frame off of the sub-floor.

What is a standard door frame opening?

Standard door heights are 6/6 (78”) and 6/8 (80”). In addition, special sizes can sometimes be custom ordered. A 36” x 80” pre-hung single door will use a rough opening of approximately 38-1/2” x 82-1/4” to fit. Always remember to square up your door before you nail the frame in place to assure it will close properly.

What width should a door frame be?

762mm
The most common door frame widths are 762mm, as they can accommodate the most regularly sized door. However, the door frame size you require depends on the opening within the wall, which can vary from building to building, meaning there is no standard door frame size.

How big is a standard front door frame in Australia?

The standard exterior frames are designed to hold doors 2040mm high and 820, 870, 920 or 1020 mm wide. Door manufacturers in Australia are producing doors in standard sizes to give the opportunity to its customers to choose doors in a variety of colours and materials without worrying if the door they like will fit the door frame or not.

How big is a standard toilet door in Australia?

In Australia, the most common internal standard door for both panel and flush has a height of 2040mm, a width of 820mm with a thickness of 35mm. While this is the most common standard door size, there are other sizes which are popular and also deemed standard size and these are: Doors for toilets and dressers are generally smaller in width.

How tall should a door handle be in Australia?

Regardless of the size of the door, the Australian Standard AS 1428.1 (Design for access and mobility, Part 1: General requirements for access) recommends that the height of the handle should fall within 900mm and 1100mm above the floor. This is around waist height for the average adult.

What is the standard thickness of doors in Australia?

What is the standard thickness in Australian doors? The average thickness for standard doors in Australia is 35 mm for internal doors and 40mm for external doors. However, the thickness of these doors varies according to the requirement of the client and can be altered for a sleek and aesthetic look to space.