Popular tips

How do I clear the error code on my KitchenAid oven?

How do I clear the error code on my KitchenAid oven?

Sometimes error codes can be cleared by resetting the power to the oven. You can do this at your circuit breaker box by turning off the circuit breaker or fuse, leaving it off for one minute, and then turning it back on. Often, this power reset will allow the stove to reboot and solve the problem.

What does F2 E1 mean on KitchenAid oven?

Touch Pad Cable
F2-E1 – Touch Pad Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

How do I reset my KitchenAid oven?

Reset power to the product:

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Power unit up by turning on the circuit breaker(s).
  3. Start a bake cycle.
  4. Monitor the oven for one (1) minute to ensure the error code does not display again.
  5. Verify oven operation.

What is f2eo?

So F2 E0 means that you have a stuck key as you know. Unfortunately this usually means that your touchpad has shorted. You can try to turn the circuit breaker off for 60 seconds to see if the electronics will reset. If that doesn’t work, replacing the touchpad is the only way to fix the problem.

What does F6 mean on a KitchenAid oven?

F6/F7/F8/F9. Error codes F6 through F9 indicate circuit problems. An F6 code indicates a time-keeping circuit error, so try resetting the time or cook function and ensure the wiring is properly grounded.

What does error code f6e0 lost communication of microwave?

If not, F6 E0 means there is a communication error between the main control board and the interface control board. You can definitely uninstall the oven and remove the top panel to look around and make sure all the wires are secure, but that’s about all you can do as far as diagnosing this…

What does an F6 mean on a Hunker oven?

Error codes F6 through F9 indicate circuit problems. An F6 code indicates a time-keeping circuit error, so try resetting the time or cook function and ensure the wiring is properly grounded. An F7 code refers to a function button that has become stuck, and the F8 code means the entire ERC has failed.

What does the error code F6 E0 mean?

The first thing you want to do is just turn the circuit breaker off for 60 seconds to see if the electronics will reset. If not, F6 E0 means there is a communication error between the main control board and the interface control board.