Popular tips

Does meraki support OSPF?

Does meraki support OSPF?

Cisco Meraki MX security appliances support the OSPF routing protocol to advertise remote VPN subnets to neighboring layer 3 devices. This feature is useful in topologies where a large number of VPN subnets makes configuring static routes impractical.

Can meraki do BGP?

On the Security & SD-WAN > Configure > Site-to-site VPN settings page, BGP configuration is available for one-armed VPN concentrator MXs. iBGP sessions are automatically established between MX appliances over their Meraki AutoVPN tunnels.

Is meraki a SD-WAN?

All Cisco Meraki security appliances are equipped with SD-WAN capabilities that enable administrators to maximize network resiliency and bandwidth efficiency.

Can you use Meraki auto VPN on MX?

Note: Please note that the MX will only advertise Meraki Auto VPN routes (including static routes shared into Auto VPN) with OSPF. The MX will need static routes configured for any other local subnets.

What does OSPF, the Meraki way, do?

The priority was on providing the controls which would enable Meraki–to–Meraki dynamic routing, but also crucially, the ability to interoperate with routers and routing switches from the traditional Cisco family and others. This screen grab captures all the OSPF settings available.

Can you use OSPF on a MX device?

Note: MX devices in Routed mode only support OSPF on firmware versions 13.4+, with VLANs disabled. OSPF is otherwise supported when the MX is in passthrough mode on any available firmware version. This can be set under Security & SD-WAN > Configure > Addressing & VLANs .

What is the port forwarding option on Meraki?

Manual: Port forwarding: If the Automatic option does not work, you can use this option. When Manual: Port forwarding is enabled, Meraki VPN peers contact the MX-Z device using the specified public IP address and UDP port number.