Useful tips

How do I update Sena SMH5 firmware?

How do I update Sena SMH5 firmware?

Download and install the Sena Device Manager on your computer. Update the firmware of your Sena product with the Sena Device Manager. Reset your Sena product to the factory default setting (refer to the User’s Guide) and pair your Sena product with your Bluetooth device again. Click here for Firmware Release Notes.

How do I update Sena to latest firmware?

How to Update Your Firmware:

  1. Run the Sena Bluetooth Device Manager from your computer.
  2. On the WELCOME screen, press the NEXT button.
  3. Follow the instructions to have your headset recognized then press the NEXT button.

How long does it take to charge a Sena SMH5?

It takes about 2.5 hours to be fully charged. To pair your phone to the SMH5 please follow these steps: 1. Turn on the SMH5 and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps.

How do I connect my Sena SMH5 to my phone?

Mobile Phone Pairing

  1. Turn on the SMH5-FM and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps.
  2. Search for Bluetooth devices on your mobile phone.
  3. Enter 0000 for the PIN.
  4. The mobile phone confirms that pairing has completed and the SMH5-FM is ready to use.

How do I upgrade my smh5 firmware to Sena?

The advice was to upgrade my firmware. So installed Sena software from the SMH5 downloads page. Installation went through and asked me to connect device which I did, and then the Windows hardware wizard popped up to install the drivers. All good so far.

What do I need to know about the Sena smh5?

The two SMH5 headsets A and B are paired with each other for intercom conversation. If the pairing process is not completed within one minute, the SMH5 will return to stand-by mode. The SMH5 supports firmware upgrade function. Please visit Sena Bluetooth web site at www.sena.com to check the latest software downloads. Still Have Questions?

Why is my smh5 not working with my iPhone?

My SMH5 has stopped working with my iPhone for Siri commands (press top black button to invoke Siri to make calls etc). The advice was to upgrade my firmware. So installed Sena software from the SMH5 downloads page.

How do I Reset my Sena smh5 headset?

Within 5 seconds, press the Jog Dial to confirm reset. The headset will be restored to factory setting and switched off automatically. You will hear a voice prompt saying “Headset reset, good-bye”. If you don’t press the Jog Dial within 5 seconds, the reset attempt is canceled and the headset returns to stand-by mode.