What is the baud rate for RS232?

100 to 20k baud
Basically, RS232 can transfer a single byte of data over a serial cable having between 3 to 22 signals and running at speeds from 100 to 20k baud. Common baud rates used are 2.4k, 9.6k, 19.2k; the cable length can be up to 50ft.

What are the standard baud rates?

Baud rates can be just about any value within reason. The only requirement is that both devices operate at the same rate. One of the more common baud rates, especially for simple stuff where speed isn’t critical, is 9600 bps. Other “standard” baud are 1200, 2400, 4800, 19200, 38400, 57600, and 115200.

What is the maximum baudrate of RS232?

But the main drawback of RS232 standard is data rate and length of cable. RS232 supports a maximum baud rate of 19200 bps and the maximum length of the cable is 20 meters.

What is RS232 baud rate do you use?

More formally RS232 is an asynchronous communication protocol that lets you transfer data between electronic devices. Basically it can transfer a single byte of data over a serial cable having between 3 to 22 signals and running at speeds from 100 to 20k baud. Common baud rates used are 2.4k, 9.6k, 19.2k , The cable length can be up to 50ft.

What is baud rate in serial port?

baud-rate is the desired baud rate setting for the RS-232 serial console port in bits per second (bps). Valid values are 110, 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200. The default value is 115200 on Solace PubSub+ 3260, 3530, and 3560. To view the baud rate used for the RS-232 serial console port, enter the show console command.

How long is a RS232 cable?

The RS-232 standard specifies this as 15 metres (50 feet). However this is a conservative figure accounting for high serial speeds over high capacitance cabling, for example using a baud rate of 9600 (a common console speed) over typical Cat 5 cabling, the maximum length increases to 100 – 150 meters (328 – 500 feet).