Users' questions

How do I configure my HP ProCurve Switch?

How do I configure my HP ProCurve Switch?

How to: Configure a HP ProCurve switch

  1. Step 1: Connect your serial connection.
  2. Step 2: Conenct PuTTY.
  3. Step 3: Get the IP address.
  4. Step 4: Set time server.
  5. Step 5: Set SNMP community info.
  6. Step 6: Launch the web GUI.
  7. Step 7: Configure basic info.
  8. Step 8: Create VLANs.

How do I change the IP address on my HP ProCurve Switch?

HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.

How do I log into my HP ProCurve Switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How to import hp 2920 ProCurve switch into Network Configuration Manager?

Import the HP 2920 Procurve Switch template into Network Configuration Manager to gain complete control and visibility over your devices. Hardware details (Model No) is added properly. Disclaimer: This web page is intended to provide you information about new Device Templates to manage your network.

How to configure HP ProCurve switch with commandline?

All you have to do is copy/paste all (except the first “Running configuration:” line) to notepad on “Backup settings” part to “HP ProCurve Switch 2524#”. If you have set operator and/or manager passwords, don’t copy/paste the lines which start with password. If you are using windows machine and need tftp server software, you should try 3CDaemon.

How can I Reset my HP ProCurve switch?

Use a pointy object (like paper clip) and press “Reset” and “Clear” buttons on the front of the switch at the same time. Release “Reset” button. When “Self Test” LED start to blink, release “Clear” button too. Now the switch should do it test routines.

Which is the Global Configuration level in hp switch?

■Global Configuration level:Provides all Operator and Manager level privileges, and enables you to make configuration changes to any of the switch’s software features. The prompt for the Global Configuration level includes the system name and ” (config)”. To select this level, enter the configcommand at the Manager prompt.