How configure HP a5500 switch?

You need to configure below command from Console to set up IP address and enable Web Interface login. [Sysname-luser-admin] password simple admin. After using this command, you can go to web interface by ip 192.168. 0.1 with username = admin and password = admin.

How do I enable telnet on my HP 5500 switch?

Tutorial HP Switch – Telnet configuration On the prompt screen, enter the administrative login information. After a successful login, the administrative menu will be displayed. Access the Network menu, and select the Service option. Click on the Apply button.

What kind of Ethernet switch does HPE 5500 use?

The HPE 5500 EI Switch Series is comprised of Layer 2/3 Gigabit Ethernet switches that can accommodate the most demanding applications and provide resilient and secure connectivity as well as the latest traffic prioritization technologies to enhance applications on convergent networks.

What are the features of the HP a5500 ei switch?

Designed for increased flexibility, these switches are available with 24 or 48 Gigabit Ethernet ports. Power over Ethernet (PoE) and non-PoE models are available with optional GbE and 10 GbE expansion capability. The all-fiber model with dual power supplies is ideal for applications that require the highest availability. Features and benefits

Is the HP a5500g a Gigabit Ethernet switch?

NOTE: H3C S5500-52C-EI Gigabit Ethernet Switch is also known as HPE A5500-48G EI Switch and is a part of HP A5500G EI Switch Series. Click here to go to product specifications page .

How many VLANs can I configure in hp CLI?

The CLI configures and displays port-based and protocol-based VLANs (see Using the CLI to configure port-based and protocol-based VLAN parameters. In the factory default state, support is enabled for up to 256 VLANs. (You can reconfigure the switch to support up to 2048 (vids up to 4094) VLANs.)