What is the best Polymeric jointing sand?

Below, find picks for the best polymeric sand in a range of categories.

• BEST OVERALL: DOMINATOR Natural Joint Stabilizing for Pavers.
• BEST BANG FOR THE BUCK: Sakrete Paver Set Joint Sand.
• UPGRADE PICK: Alliance Gator Maxx G2 Intelligent Polymeric Sand.
• BEST FOR SMALL PROJECTS: DOMINATOR Joint Stabilizing for Pavers.

How long does it take G2 polymeric sand to harden?

A minimum of 24 hours drying time is required prior to allowing significant foot traffic and 48 hours for vehicular traffic on the paver surface. Polymeric sands are designed to soften and re-heal.

How often does polymeric sand need to be replaced?

How long will the sand/dust last before it needs to be replaced? For Alliance polymeric sand and Dust – If the proper installation procedure is followed in terms of paver installation according to the ICPI and the Polymeric Sand installation according to Alliance, then 10 years.

Will water drain through polymeric sand?

Polymeric sand, if installed properly, will harden to lock you pavers in place and create a more effective weed and insect deterent while still allowing water to drain freely.

Can you pressure wash polymeric sand?

You can’t pressure wash and apply polymeric sand on the same day. I should warn you that getting the stain off is a huge problem so it’s best to take the time to avoid it in the first place.

Can you power wash polymeric sand?

How long should polymeric sand be rained on?

In general, it is recommended to wait at least 24 hours after any significant rainfall to proceed with the installation of polymeric sand. Understandably, it is not recommended to lay jointing sand in the rain, or when precipitation are expected in the hours following your work.

Can polymeric sand be reapplied?

Unfortunately with polymeric sand replacement, you can’t just uproot any weeds and top it up. Secondly, you will have to wait a day while the surface dries before you can reapply your new sand. Remember polymeric sand and moisture don’t mix until after it’s in the joints!

Is polymeric sand permanent?

Polymeric sand relies on a chemical reaction to harden it into the joints between your paving stones. Once it hardens, it is permanent.

Can I put new polymeric sand over old polymeric sand?

Out with the Old and In with the New Unfortunately with polymeric sand replacement, you can’t just uproot any weeds and top it up. You have to completely remove all the pre-existing sand in the joints and start fresh.