What is FMC interface?

What is FMC interface?

The FMC connector is a 400-pin interface accommodating both low-voltage differential signaling (LVDS) and high-speed serial pins as shown in Figure 1. Figure 1: VITA 57.1 FPGA Mezzanine Card (FMC) simplified pin class definitions. FMC interfaces are designed to accommodate both LVDS and high-speed serial interfaces.

What is an FMC module?

FPGA Mezzanine Card (FMC) is an ANSI/VITA (VMEbus International Trade Association) 57.1 standard that defines I/O mezzanine modules with connection to an FPGA or other device with re-configurable I/O capability.

What is a Xilinx FPGA?

Field Programmable Gate Arrays (FPGAs) are semiconductor devices that are based around a matrix of configurable logic blocks (CLBs) connected via programmable interconnects. FPGAs can be reprogrammed to desired application or functionality requirements after manufacturing.

What is the use of FMC?

The FPGA Mezzanine Card (FMC) standard, developed by a consortium of companies ranging from FPGA vendors to end users, specifically targets FPGAs, increasing I/O flexibility and lowering costs in a broad range of applications.

What is XMC mezzanine?

XMC, or Switched Mezzanine Card, (PMC with high-speed serial fabric interconnect) defined by the VITA 42 standard. XMC specifies a fifth connector (“P15”) that supports PCI Express (VITA 42.3) or other high speed serial formats such as Serial RapidIO (VITA 42.2) and Parallel RapidIO (VITA 42.1).

Who buys Xilinx?

Advanced Micro Devices
Nvidia has moved to buy Arm for $40 billion in cash and stock in what would be the industry’s largest deal to date if it closes. Advanced Micro Devices has agreed to buy programmable chip maker Xilinx in a $35 billion deal to diversify its product portfolio and aid its ambitions in data centers and other arenas.

Is FPGA an emulation?

FPGA prototyping can and will replace hardware emulators. This is a false statement. While emulators may use and, indeed, some do use FPGA devices, the differences between the two tools are staggering. FPGA prototypes are designed and built to achieve the highest speed of execution possible.

How do you use FMC Transportex?

READ THE LABEL BEFORE OPENING A INSECTICIDE CONTAINER. Follow all label precautions and directions, including requirements for protective equipment. Apply Insecticides only on the pests or in the situations listed on the label. Apply Insecticides at the rates specified on the label.

What are the FMC signals for ANSI / VITA 57 FPGA?

An overview of ANSI/VITA 57 FPGA Mezzanine Card (FMC) signals and pinout of the connectors (LPC and HPC). ANSI/VITA 57 FMC – SIGNALS AND PINOUT VITA 57 FPGA Mezzanine Card (FMC) SIGNALS AND PINOUT OF HIGH-PIN COUNT (HPC) AND LOW-PIN COUNT (LPC) CONNECTORS 1. High-pin count (HPC) connector, HPC pinout 2. Low-pin count (LPC) connector, LPC pinout 3.

How many pins are in the LPC connector?

Footprints can be viewed in Lib_Altium repository. The LPC connector has 4 rows (C, D, G, H) with 40 pins each. The following table summarizes the pins of the LPC connector.

What kind of FMC card do I Need?

FMC card for video development systems requiring up to 5 cameras. The main interface between the logiFMC-FPD-III-C daughter card and the connected cameras is the FPD-Link III (Flat Panel Display Link). Networking and Motor Control daughter card. Compact and effective interface for advanced networked motor and motion control systems.

Why do we need a FMC card for FPGAs?

System overhead: Simplifying the system design reduces power consumption, IP core costs, engineering time, and material costs. Design reuse: Whether using a custom in-house board design or a commercial-off-the-shelf (COTS) mezzanine or carrier card, the FMC standard promotes the ability to retarget existing FPGA/carrier card designs to a new I/O.