What are the sky router settings?

Check you’re connected to your Sky Broadband, then:

• In a browser address bar, go to 192.168.0.1.
• Select Wireless or WiFi.
• Enter the default username admin.
• And depending on which hub you have, the password sky or the WiFi password on the back of your hub.
• Enter a new Network Key – that’s the WiFi password you want to use.

What can I do with an old sky router?

You can send us old equipment to recycle. We can reuse most parts of your old products and any we can’t reuse, we’ll recycle.

Can I use my old router for Sky Broadband?

Most Sky routers do not allow you to use wireless repeater mode with two Sky routers. However, you can use an old Sky Router as a repeater if you connect it to the primary router via an ethernet cable. Login to your new router, Advanced, and LAN IP, configure the starting IP from 192.168. 0.3.

Can a old Sky router be used as an access point?

Re: Using old Sky router as Access Point You should be able to use it as a wired access point provided you change the IP address, and disable DHCP. This guide, for a Voyager router, should give you some idea of the settings to use. Using an old BT Voyager modem as an additional wireless access point.

How to use an old Sky SR101 as a second router?

Use an old Sky SR101 as a second router access poi… 22-04-2017 11:36 AM I have a standard issue Plusnet hub and an old Sky SR101 that I would like to use to extend the wifi range so that it reaches my garden shed/office. I have a Ethernet switch connected to one of the ports on the Plusnet hub.

How can I Use my Sky router as a DHCP server?

I turned off the WiFi access on the SR101 and then under the ‘Advanced’ menu, I selected ‘LAN IP Setup’. To avoid a conflict with my primary broadband router, I changed the IP address to something different and then deselected ‘Use Router as DHCP Server’.

What’s the latest version of the Sky router?

At the time of writing (June 2019) on a web page, Sky lists firmware version as: 2639, 3591 and 3734. However Sky’s Recovery Tool package which contains firmware, appears to only include version 2639, which is a shame. My primary router is a HG633, which the SR101 connects to via a long ethernet cable.