Other

How much does a center pivot irrigation system cost?

How much does a center pivot irrigation system cost?

Standard 160 acre system and end gun with actual irrigated area of 132 acres installed at a cost of $48,000 with a power and water source and connecting equipment cost of $30,000.

What is the downside of center pivot irrigation system?

Negatives of Using a Center Pivot System There is no perfect irrigation system. Not suitable for irrigation of fields of rectangular or square shape. Field surface should be flat. Not suitable for irrigation in windy conditions; uneven water application may occur and applied fertilizers may be carried away.

How much land can a center pivot spray irrigation system irrigate?

The area covered can be from 3.5 ha to 60 ha, according to the size of the CP, and the larger the area the lower is the cost of the system per unit area.

How much does a mini pivot cost?

The cost of the small-field pivot itself is approximately $1,200 per acre, says irrigation specialist Tyler Fields, of Guess Irrigation, in Hartsville, S.C.

How efficient is center pivot irrigation?

A standard 1300 ft (400 m) long center pivot will have 100 to 110 sprinklers. For spray irrigation on drops over a crop with a full canopy, application efficiencies of about 90 to 92% are attainable with no surface runoff whereas sprinklers on the top of the pipe may attain efficiencies from 80-85%.

How much water does it take to run a pivot?

This example shows the minimum water supply rate for a center pivot equipped with high pressure impact sprinklers should be approximately 772 gallons per minute (656/0.85). The minimum system flow rate for a center pivot with low pressure spray nozzles at truss rod height would be 690 gpm (656/0.95).

How much water does it take to run a center pivot?

How much does a pivot cost per acre?

Short pivots have a very high cost per acre and longer pivots cost much less. On a 1/4 mile long pivot that irrigates 126 acres the installed cost may average between $75,000.00 and $80,000.00, plus freight. This would place the cost per acre at between $595.00 and $635.00 per acre.

How long is a pivot span?

The distance between towers is called a span. The length of the span can vary between 130 and 200 feet. The typical pipe on the pivot has an outside diameter of 65/8 inches with a wall thickness of 0.109 inches. The pipe and the towers are typically galvanized to prevent corrosion.

Where can I get a centre pivot irrigation system?

With years of experience in delivering irrigation solutions to large and small farming enterprises throughout the Australian eastern states Darling Irrigation is well positioned to meet any centre pivot or lateral move irrigation requirements presented by our farming clients.

How big is a mini pivot irrigation system?

​ The Reinke engine driven Mini-Pivot is a single span system ideal for small fields and areas where power access is limited. It comes with a variety of gearbox, span length and end boom options and has a maximum system length of 318′.

Which is better lateral or center pivot irrigation?

See how center pivot irrigation and lateral irrigation can increase yields. Do you know the best way to irrigate your crops? Learn how pivot irrigation can be a smarter and more cost-effective way to irrigate a variety of key crops around the world, including corn, soybeans, potatoes, biofuels and more.

How does Zimmatic center pivot irrigation increase yields?

See all the ways Zimmatic can help conserve resources, track performance, increase profitability and improve your overall operation season after season. See how center pivot irrigation and lateral irrigation can increase yields. Do you know the best way to irrigate your crops?