How do I use my Whirlpool oven and stove?

Operating Whirlpool gas or electric cooktops and ovens is simple. To use your electric cooktop, push in on the control knobs and turn to set the temperature between “Lo” and “Hi”. Light the flame on Whirlpool gas cooktops by pushing in on the control knobs and turning the counter-clockwise.

Where do I find my Whirlpool model number?

You will find the model number on a sticker or rating plate. This can usually be found either on or behind the door frame, or behind the filter flap at the bottom of the appliance.

How do you troubleshoot a Whirlpool oven?

Check/Troubleshoot = Unplug the oven power cord or turn OFF the circuit breaker. Reconnect loose wires on the oven door lock assembly wire harness. Replace wire harness if needed. Check the door lock assembly for faults and replace it if faulty.

How do you set a Whirlpool oven?

To preheat a Whirlpool oven, begin by pressing the Bake function. The oven will automatically display a temperature of 350 degrees Fahrenheit (175 degrees Celsius). If you need to bake at a higher or lower temperature, use the arrows to adjust. Then press Start.

How do I find my Whirlpool serial number?

Whirlpool Serial Number Codes 1st Alpha Character = Manufacturing Division Code. 2nd Alpha Character = Year Manufactured (See Tables). 1st and 2nd Digit = Week of Year Manufactured. 3rd through 7th Digit = Order of Manufacturing that Week.

Where is the serial number located on a Whirlpool stove?

The serial number for your oven will be located on the left side rim of your oven tub. Essentially, it is on the area where the door will close against the oven.

How do you reset a Whirlpool oven?

Reset power to the product:

1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
2. Power unit up by turning on the circuit breaker(s).
3. Start a bake cycle.
4. Monitor the oven for one (1) minute to ensure the error code does not display again.
5. Verify oven operation.

How do I reset my Whirlpool oven control board?

How do you remove the control board on a Whirlpool oven?

Access the Main Control Board Pull the oven out slightly, about 3-4 inches, to gain access to the two control board mounting screws: two on the right side and two on the left. Open the top oven door and grab the control board on each side. Pull it toward you and then pull up.

How do I get the lock off my Whirlpool oven?

Possible Solutions

1. Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door.
2. Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on.
3. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.

Are there any Whirlpool Gold series user manuals?

User Manuals, Guides and Specifications for your Whirlpool GOLD SERIES Refrigerator. Database contains 1 Whirlpool GOLD SERIES Manuals (available for free online viewing or downloading in PDF): Installation instructions manual . LG LFX28977ST – 27.6 Cu.

How to set a timer on a whirlpool gas range?

While the oven door is closed, press the oven light switch to turn the light on and off. The oven light will come on when the oven door is opened. TIMER (Set/Off) Oven timerThe Timer can be set in hours or minutes up to 12 hours and 59 minutes. 1. Press TIMER. 2. Press TEMP/TIME “up” or “down” arrow pads to set the length of time. 3.

How does the Whirlpool gas range light work?

1. Check that the oven is off. 2. Press CLOCK. 3. Press TEMP/TIME “up” or “down” arrow pads to set the time of day. 4. Press CLOCK or START. OVEN LIGHT Oven cavity lightThe oven light is controlled by a keypad on the oven control panel. While the oven door is closed, press the oven light switch to turn the light on and off.

How to set the time on a whirlpool oven?

1. Press SETTINGS/CLOCK until “Clock” is displayed. 2. Press the number keypads to set the time of day. 3. Press START. SETTINGS/CLOCK Oven use functionsEnables you to personalize the audible tones and oven operation to suit your needs. See the “Oven Use” section.