How accurate are body trace scales?

BodyTrace scales are very precise, but they can also be very finicky. Here are some of the steps you can take to make sure you get an accurate reading every time you step on the scale: Make sure the scale is placed on a hard, flat surface. Remain completely still on the scale until you see the weight flashed with ‘lb’.

How do I fix scale error?

Batt error message

1. Remove old batteries from the back of the scale.
2. Insert 4 new AA batteries. The scale manufacturer recommends using Duracell batteries.
3. Wake the scale before weighing in again.
4. Once you’ve weighed in, the scale should display “sent”.
5. Navigate to your Progress Page to view your weight chart.

How does a body trace scale work?

The scale uses cellular towers in your area to transmit your readings to the Achieve on The Go app. Newtopia app every time you step on the scale to refresh your weight graph! If you are experiencing issues, contact us. We are standing by to support you.

How do I reset my prevent scale?

How do I reset my omada scale?

1. Remove all batteries from the back of your scale for at least 10 minutes.
2. Reinsert the batteries.
3. Set the scale on a flat, even surface.
4. Press down on the center of the scale with one foot to wake up the scale and immediately step off.

Why is my Body Trace scale not working?

ERR 2 – Can’t log weight. Make sure your scale is on a hard, flat surface and you stand still on the scale until your weight shows up on the display. ERR 4 BATT – Low battery. Replace the 4 AA batteries. ERR 4 CELL – Network connection error. Try moving your scale to a different location in your home.

How to get started with your bodytrace scale?

Your BodyTrace scale is ready to use once you pull it out of the box. Find a hard, flat surface for the scale in your home and put in the provided batteries. This scale will not give you accurate measurements if it is on a soft surface (e.g. carpet). Step on the scale and stand still.

How to get an accurate bodytrace weight reading?

BodyTrace scales are very precise, but they can also be very finicky. Here are some of the steps you can take to make sure you get an accurate reading every time you step on the scale: Make sure the scale is placed on a hard, flat surface. Not carpet. Stand on the scale with your weight evenly distributed.

How to change the polarity of a bodytrace scale?

Remove all batteries from the back of your scale. Leave the scale without its batteries for at least 60 minutes. Reinsert the batteries ensuring the correct polarity and they are firmly in place. Place your scale on a flat, even surface without carpet. Press the center of the scale with one foot to wake up.