Why does my Whirlpool washer not spin?

If your Whirlpool Washer is not spinning the problem is almost always the lid switch. If the lid switch is bad you will not hear the motor running when in spin. To check the lid, first unplug the washer. If you do not have continuity; the lid switch is bad and needs replacing.

How do I reset my Whirlpool washer that won’t spin?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

Why is my washing machine not doing spin cycle?

An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.

Why is my washer not spinning all the water out of my clothes?

Drain Hose Issues The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.

Why does my Whirlpool care 2 washer not spin?

If your Whirlpool Care II Ultimate Care Washer doesn’t spin, this might be due to a malfunction of the lid switch, motor coupling, or an issue with the clutch. Other potential problems may include a faulty transmission or overall motor failure.

What should I do if my Whirlpool washing machine is not working?

If your Whirlpool washing machine is not working correctly, resetting it can often be enough to get it back in running order. The best way to know how to reset your particular Whirlpool washing machine is to check the owner’s manual.

Why does my Whirlpool washer clutch not work?

If your Whirlpool is a direct drive washer it may have a failing clutch. The clutch will prematurely wear due to loading the washer improperly. You can do an easy eyeball test where you simply lean it back and look at the area surrounding the gearcase and clutch for signs of oil.

Where is the drain filter on a whirlpool washer?

You can find the drain filter behind the access panel on the bottom front of your machine. The filter is easy to clean and once it’s clean the water should flow better when draining from the machine. If the hose and filter are both okay, you’ll need to check the drain pump.