Where should MagnaClean be fitted?

MagnaClean Professional is suitable for all central heating systems and can be fitted anywhere on the main heating circuit. In order to achieve the best protection for the boiler, it is recommended that MagnaClean Professional is fitted between the last radiator and the boiler (see diagram overleaf).

Can a MagnaClean be fitted horizontally?

A. MagnaClean Professional can be fitted in any orientation. Each isolation valve can rotate through 360° making it possible to install in a vertical position on horizontal pipework.

What does a MagnaClean Professional 2 do?

The Adey MagnaClean Professional 2 filter – 22mm – uses new technology to provide exceptional and versatile central heating protection. The in-line, push-fit filter not only extends the operational life of the central heating system, but also reduces maintenance and energy bills as well as reducing carbon footprint.

Does the MagnaClean go on the flow or return?

Re: Circulating pump on flow – where to place the Magnaclean There is simply the boiler flow top outlet and the Return the lower outlet in 28mm . As usual the condensate trap is at the bottom.

How often should you clean a MagnaClean?

The MagnaClean filter must be cleaned out at intervals, but you can do this yourself in ten minutes; annually or more often if you prefer.

Can a Magnaclean go on the flow?

Re: Circulating pump on flow – where to place the Magnaclean There is simply the boiler flow top outlet and the Return the lower outlet in 28mm . As usual the condensate trap is at the bottom. As stated the top flow outlet to pressure relief is asbout 6 inches elbow down to pump from pump underfloor to airing cupboard.

How often should you clean a Magnaclean?

How often should a magnetic filter be cleaned?

We recommend it is cleaned once a year, using the ADEY Best Practice six-step process, which includes topping up with ADEY’s inhibitor, MC1+.

How often should you service a MagnaClean?

How often does MagnaClean need to be serviced/cleaned? After initial installation and checking first pass capture of magnetite, usually once a year alongside the boiler service.

Can I clean MagnaClean myself?

When you have a MagnaClean filter fitted, it collects attracts the particles that cause sludge and this can then be cleaned off as part of a regular boiler service. It’s also something you can do yourself.

Can a magnaclean professional2 be installed on an existing boiler?

Whether you’re fitting a MagnaClean Professional2® on a brand new boiler or retrofitting it on an existing boiler, get the installation right to give the boiler the best protection. And to help keep the filter performing as powerfully as the day it was fitted, service it properly. To do both, simply follow our guide.

How often should a magnaclean be serviced after installation?

After installation, you should use MC1+ Inhibitor, a chemical liquid the dose of which should be monitored regularly, ideally during an annual service. Your MagnaClean should be serviced annually, just like your boiler. During the servicing of your MagnaClean, the engineer will clean out all of the debris that’s been collected by the magnet.

What are the installation instructions for magnaclean microand?

The following instructions are designed to assist engineers in the safe and effective installation and servicing of MagnaClean Microand should be followed at all times. ADEY recommends using the powder-free vinyl gloves provided. Any queries should be directed to your supervisor or ADEY direct on 01242 546717.

Where is the best place to fit a magnaclean?

As long as its accessible there is no problem fitting it under the floor! In fact on the ground floor thats a very good place as its less probablematic when it leaks! As ChrisR says, the best way to keep your system working is to not fit the Magnaclean. It is, ironically, the weakest link in any central heating system.