What is the default password for a Linksys WRT54G router?

admin
What default IP Address, username and password are used to log in to the router’s web-based setup page? The default IP Address is 192.168. 1.1. On the log in window, leave the username blank and the password is “admin”.

How do I Reset my Linksys WRT54G2 router password?

When the WRT54G2 Default Password Doesn’t Work

1. Power on the WRT54G2 router.
2. Turn the router around so you have access to the back, where the cables are connected.
3. With something small and sharp like a paperclip or pin, press and hold the Reset button for at least five seconds.

How do I configure my Cisco Linksys WRT54G2 v1?

First you connect to your Linksys router. Then go to http://192.168.1.1 and type in “admin’ as your password in to log in window and click “log in’. then go to the “wireless’ tab and enter your wireless network name. In the wireless channel select ’11 2.462GHz’ and click save.

What does it mean if my Linksys router is blinking?

If the Power or Diag LED (Light Emitting Diode) on your Linksys router is blinking, it means the firmware is corrupted. If this happens, you won’t be able to do the following: Access the router’s web-based setup page. Assign IP Addresses to computers connected to your router using its DHCP capabilities.

How do I put a password on my Linksys Wireless G Broadband Router?

How to Put a Password on a Linksys Without the CD

1. Open a Web browser, type “192.168.
2. Type “admin” into the Password field.
3. Select “Administration” from the main menu.
4. Click “Save Settings” to assign a password to the Linksys router.

Does Resetting router change wifi password?

It’s important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. The most universal way to reset a router, however, is via the reset button, usually found on the router’s back or underside.

How install DD WRT on Linksys wrt54g2 v1?

Hard reset the router, wait 5 minutes, set a password and configure DD-WRT….[edit] Overview

1. Download the correct files needed to install DD-WRT to your computer.
2. Hard resett your router.
3. Configure your computer with a static IP address on the same subnet as the router.

How do I use my Linksys WRT54G as a repeater?

Linksys Wireless-G Router (WRT54G)…Configuring an Access Point as a wireless repeater

1. Access the router’s web-based setup page.
2. When the router’s web-based setup page opens, click Status then click Wireless.
3. Take note of the MAC Address.
4. Connect a computer to the access point.
5. Assign a static IP address on the computer.

What is the default password for Linksys Smart WiFi router?

The default local IP address shared by all Linksys Smart WiFi routers is 192.168.1.1. The Linksys Smart WiFi default password is admin. It’s highly advisable to change it as soon as possible to prevent strangers from accessing the admin interface.

What to do if you forgot a Linksys router password?

Method 1 of 5: Resetting the Linksys Router. Turn on the router.

How do you reset a router password?

The device needs to be powered on to reset the password. Locate the reset button on the back of the router. The reset button is a small hole usually located next to the port for the power adapter. Press down the reset button for 30 seconds.