What does E3 and F6 mean on Maytag washer?

What does E3 and F6 mean on Maytag washer?

The F6 E3 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait five minutes, then plug back in.

How do I fix e5 error on my washing machine?

How to eliminate the 5E error code in Samsung washer

  1. Disconnect the washing machine;
  2. Open the plastic cover, under which the hose and drain filter is used in emergency mode;
  3. Remove the plug from the drain hose.
  4. Remove the filter screw by turning it anti-clockwise and get it out;
  5. Clean the filter from debris and dirt;

Does a Maytag washer have a reset button?

In addition to a number of heat and tumbling settings, many Maytag washers also have digital displays that indicate the minutes left on a washing cycle, which settings you have chosen and error messages. You also can reset the washer if you want to cancel a setting you chose.

What does F6 and E3 mean on a Whirlpool washer?

The Whirlpool washer F6E3 error code is a communication error from the ACU ( main control board) to the UI ( User interface ). This error is most times caused by faulty wiring or loose connectors at one the boards. It can also be caused by either board having failed.

What does 3E mean on my washing machine?

When the 3E error appears on the display, the washing stops. The process does not resume until the fault code’s eliminating. This code corresponds to a tacho sensor error – a weak or missing signal.

How do I fix F5 E3 error on Maytag washer?

F5 E3 Error Code

  1. Power unit down by turning off the circuit breaker or unplugging for one (1) minute.
  2. Power unit up by reconnecting power.
  3. Restart a new cycle.
  4. Monitor the washer for one (1) minute to ensure the error code does not display again.

Why does my Whirlpool washer says E3?

If you receive an E3 Error code, your washer may be unbalanced. This could be caused by the washer being too tightly packed, or clothing not distributed evenly. This will usually occur during the spin cycle.

What does the error code 3E mean on a Samsung washer?

What Does The Error Code 3E Mean On A Samsung Washer? The 3E error code on a Samsung washer is also known as the “Drive Motor Error”. As the name suggests, the code is triggered when the appliance’s Direct Drive motor is drawing an excessive electrical current.

Why does my Maytag washer have an E3 error code?

These codes in your (made-by-Samsung) Maytag washer might pop up during the rinse/spin cycle with the motor sounding like it wants to spin but it ain’t. In fact, the E3 error code means that the Machine Control wants to make the motor spin…

What does E3 mean on a Maytag mah6700?

In fact, the E3 error code means that the Machine Control wants to make the motor spin but won’t do it because it’s getting a weird reading from the tachometer.

What kind of washing machine does Maytag use?

For sturdy, dirty loads that need intense cleaning. Use the PowerWash® cycle by Maytag to deliver powerful cleaning to heavily soiled items. Combines extra wash action, heated water and high spin speeds for a deep clean. Washing large items like sheets, sleeping bags, small comforters, jackets and small rugs.