Guidelines

How long does Liqui Moly ceratec last?

How long does Liqui Moly ceratec last?

Once aded, it lasts about 30,000 miles.

How do I use ceratec?

What is Cera Tec and how do I apply it?

  1. direct addition to the motor or transmission oil (cold or warm)
  2. ideally, pour in together with fresh oil when changing the oil.
  3. 300 ml is sufficient for up to 5 liters of motor oil.
  4. the optimal dosage is about 6 % of the total oil fill quantity.

Can you mix Liqui Moly with Castrol?

No. it is recommended that you NOT mix LiquiMoli with other brands of oils.

Is Liqui Moly Porsche Approved?

The new product from Liqui Moly is officially approved by Porsche for all vehicles that require an oil with the company’s A40 standard. That means pretty much every Porsche with a gasoline motor. The oil is not meant for use in your typical vehicle, only sports cars.

Is Liqui Moly any good?

It has good cold-start behavior, as well as improved wear characteristics for modern engines. LIQUI MOLY MoS2 is also recommended for older Porsches with air-cooled engines. The extra additives are very effective at reducing wear for high-heat situations, another difficulty for oil manufacturers.

Can you mix Liqui Moly additives?

Can two oil or fuel additives be used at the same time? Yes, our additives are aligned to one another in their formula in such a way that they do not negatively influence themselves and the overall mixture.

Is ceratec any good?

Excellent German made product. Engine run much smoother, low noise, less vibration during stop and go traffic. I did not notice any improvement in fuel consumption. Highly Recommended!

Is Liqui Moly Molygen fully synthetic?

A fully synthetic LIQUI MOLY specialty with a unique additive technology the powerful MFC (Molecular Friction Control) technology prevents formation of deposits while simultaneously reducing frictional losses. The synergetic effect provides optimum wear protection even under tough operating conditions.

Why is Liqui Moly so good?

Can I mix Liqui Moly with synthetic oil?

Can the oil additive also be mixed with fully synthetic motor oils? Yes, this has been tested by a field test with company cars. The oil additive minimizes friction by approx. 30%.

Is Liqui Moly good for engines?

Is Liqui Moly good for Toyota?

November 2019 – “It is the lowest viscosity oil that we have ever launched”, explains Sebastian Zelger, Director LIQUI MOLY USA, when talking about the new Special Tec AA 0W-16. It is suitable for selected models from Honda, Lexus, Suzuki and Toyota.

How long does Liqui Moly ceratec last for?

Anyway, with the engine oil drained, the oil filter was replaced , a fresh can of synthetic engine oil was poured in and I was good to go. Ceratec is said to be able to last for at least 4 oil changes once the additive had bonded with the internal engine components.

Why does Cera TEC-Liqui Moly reduce fuel consumption?

Prevents direct metal-to-metal contact, thus increasing the assembly service life. Reduces fuel consumption in gasoline and diesel engines thanks to the low-friction effect. Miscible with all commercially available motor oils and motor vehicle gear oils. 300 ml is sufficient for up to 5 liters of motor oil.

Is the Liqui Moly Oil good for petrol?

Luckily Liqui Moly make some very good oils and I have been doing some research into Ceretec as it seems to be about the only friction reducing additive that does work to some extent. Firstly I would caution you that it might not be good for the spark plugs if you have a petrol car, although that possible side effect seems fairly minimal.

Why does my Liqui Moly ceratec make rattling noises?

A saw a puff of smoke coming out of the engine bay when I lifted off the throttle and thought that the car had suddenly develop a bit of blow by from the idling it had done and didn’t pay much attention to it.With the air condition on and stereo playing, I begin heard loud rattling noises .