How do you empty the Kyocera waste toner box?

1 Open the waste toner box cover. 2 Remove the Waste Toner Box. 3 Put used Waste Toner Box into the plastic waste bag. 4 Use empty toner bottle to replace waste toner box.

What happens when waste toner box is full?

The waste toner box collects excess toner that is produced during printing. When waste toner box becomes full, the message “Please replace the waste toner box.” appears. Do not throw the waste toner box into a fire. Toner may splatter and cause burns.

Why is my Kyocera waste toner box full error?

This error code shows mainly because of two reasons, If the toner is filled in the waste toner container. If the sensor is defective: The sensor is located on the drum unit. The machine put all the excess toner from the printing process into this white plastic box to make the copy neat and clean.

What does 7980 mean on Kyocera fs-1030d waste toner box?

After a short search I came across the explanation that two red flashing LEDs on the Kyocera FS-1030D probably stands for ‘waste toner box full’. This maintenance manual states on page 51, that error code 7980 stands for ‘Waste toner full’ – which should occur after 100.000 pages of printing. Sounded interesting, but I had a problem.

What does the message ” waste toner box full ” mean?

What does the message “waste toner box full” mean? 1 If the toner is filled in the waste toner container. 2 If the sensor is defective: The sensor is located on the drum unit. The machine put all the excess toner from the… More

How can I get toner out of my Kyocera printer?

Switching the printer off and on again several times, removing and reinserting the paper feed unit, the toner cartridge and the printing unit (PU) did not help. A look at the users manual also didn’t help. The two flashing indicators for attention and toner at the same time wasn’t covered.