How do I connect to APC UPS?

How do I connect to APC UPS?

Connect the Battery in the New APC UPS Open the battery compartment. Pull the battery out half way. Connect the Red Battery Wire to the + Positive battery terminal. Push the battery into the compartment and re-install the cover.

How do I find my apc IP address?

On the LCD menu, access the About menu. On the About menu, select the SmartSlot Card option. Locate and access the IP address option. In our example, the LCD menu shows the APC UPS IP address 10.10.

How do I access my apc management card?

Connect to the UPS/device serial port using the correct APC configuration cable….9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.

  1. Apply the port settings to establish the connection.
  2. Press enter 3-5 times to display the username prompt.
  3. Use the default username and password of “apc”.

How does an APC network management card work?

An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network.

How to setup APC ups initial IP address?

Tutorial – APC UPS Initial IP Address Configuration The network where the UPS is connected must have a DHCP Server. First, you need to connect your APC UPS to the Network. The APC UPS will receive an IP address automatically from the DHCP server.

What is the MAC address of an APC?

All APC devices have a MAC address that begin with 00 C0 B7 which may help while reviewing your DHCP Client List. Address Resolution Protocol (ARP) – (NMC1/NMC2/NMC3) Smart-UPS front panel LCD – (available on supported SMT, SMX, and SRT Models with NMC2/NMC3)

How does PowerChute work with APC UPS management card?

PowerChute Network Shutdown works in conjunction with the APC UPS Network Management Card to protect your physical and virtual IT environment from threats to IT availability.