Where do the springs go on a Cub Cadet deck?

Possible location for the spring could be the S on the rod between the left spindle brake and the idler arm. Then the other end would hook back toward were the engagement cable plastic thing connects in that area.

Why does my Cub Cadet keep throwing the deck belt?

If the deck rides on guage wheels entirely, it could be that certain parts of your mowing domain have small “swales” or depressions that allow the deck to drop even further down when traversing one of those places. The increased angle when (if) this happens, might aggravate the tendency for the belt to derail.

Where are the springs on a Cub Cadet tractor?

Thank you for your question on the Cub Cadet tractor drives system. There are two springs under the chassis on this tractor. One is for the clutch engagement by the three idler pulleys and one attaches to the back of the tractor chassis.

What are the specs of a Cub Cadet lawn tractor?

The Cub Cadet LT 1045 is equipped with manual steering, dry disc brakes, open operator station and 13.2 liters (3.5 US gal.; 2.9 Imp. gal) fuel tank. Following attachments are available for Cub Cadet LT 1045 lawn tractor: Mid-mount Cub Cadet: 46 inch (1,160 mm) mower deck with three-blades and manual lift.

Where is the tension spring on a cubcadet 1045?

The tension spring on the three pulley idler bracket is only about 3 3/4 inches long and it also attaches to a stud coming down from the chassis pan and connects to the belt tighten pivot bracket that the idler pulleys are attached too. Examine the end of the spring and if the spring hook is broken it will have to be replaced.

Where is the PTO handle on a Cub Cadet tractor?

Note: Used on Tractor Models With Deluxe Hub Cap Only. Note: Pto Disengagement Spring 732-0932, Attaches to Pto Handle & Bracket Assy (647-04151) Inside of Seat Box. Note: (Units With Manual Pto.)