How to Mute Dterm series e nec?

Mute — Go off-hook or press Speaker key, then press soft key below Mute. Mute will flash and voice path is eliminated to the handset, headset or speaker. MIC — Press the soft key below “MIC” to activate or deactivate the microphone.

How to turn up ringer volume on nec Dterm series i?

Ringer Volume: Press( )or( )keyduringringing. When LED on this key is lighted, press key to answer a waiting call. Controls the built-in speaker which can be used for Hands Free dialing/monitoring.

How do I forward my NEC dterm Series E?

Press CFA button (or dial *7); hear broken dial tone. Dial number to which calls are to be forwarded; hear confirmation tone; hang up. CFA button lights at your telephone (or at Dterm of subline you are setting call forwarding for).

How to turn off mic on dterm Series E?

Mute — Go off-hook or press Speaker key, then press soft key below Mute. Mute will flash and voice path is eliminated to the handset, headset or speaker. MIC — Press the soft key below “MIC” to activate or deactivate the microphone. Headset — Press the soft key below “Headset” to activate headset operation if you have a headset.

What do you need to know about dterm Series E?

Dterm Series E Information/Instructions Function Keys HOLD – Press key to place an internal or external call on hold. TRF (Transfer) – Allows the station user to transfer established calls to another station. ANS (Answer) – When LED on this key is lighted, press key to answer a waiting call. (Not applicable.)

How to activate or cancel NEC dterm Series 1?

To activate or cancel, press the Feature button first, then the appropriate number. Feature +1= Turns microphone on or off. The MIC button lights when microphone is on. Feature +2= Adjusts handset receiver volume on current call. The LCD displays the current volume (LARGE OR SMALL). Press Feature and 2 to alternate. Feature +3= Selects ringer tone.

How to change time on dterm series 2?

With Dterm Series II Phones CAT Mode Procedure: This is to be done while the phone is in an idle state. 1. Press 2. Press 3. Press * 4. Press 5. Press 6. Press # 7. “CAT MODE” displayed on LCD 8. Press 9. “COMMAND” displayed on LCD 10. Press 02 11. Press 12. Press 2 13.