How redistribute RIP to OSPF?

The redistribute command uses the ospf keyword to specify that OSPF routes are to be redistributed into RIP. The keyword internal indicates the OSPF intra-area and interarea routes: External 1 is the external route type 1, and external 2 is the external route type 2.

What does the redistribute command do?

The use of a routing protocol to advertise routes that are learned by some other means, such as by another routing protocol, static routes, or directly connected routes, is called redistribution.

What is command for RIP?

The no shutdown (RIP) command in router-RIP configuration mode will enable RIP. This command enables RIP on the switch. Issuing this command enables RIP, but to send and receive RIP route updates and to route packets via RIP you must also specify interfaces on which RIP will run by using the network (RIP) command.

Which command displays RIP routes?

debug IP rip command
Which command displays RIP routing updates? Explanation: The debug IP rip command is used to show the Internet Protocol (IP) Routing Information Protocol (RIP) updates being sent and received on the router.

How to redistribute routes in Rip router1?

You want RIP to redistribute static routes that you have configured on your router. The redistribute static command tells RIP to advertise static routes, as well as directly connected routes and the routes that have been learned from other RIP routers: Router1# configure terminal Enter configuration commands, one per line.

How to remove redistribute command from routing file?

To inject routes from one routing domain into Open Shortest Path First (OSPF), use the redistribute command. To remove the redistribute command from the configuration file and restore the system to its default condition in which the software does not redistribute routes, use the no form of this command.

How to use the redistribute command in EIGRP?

Use a route map to filter which routes are redistributed into EIGRP. This command was introduced. Use the redistribute command to import routes from other routing protocols into EIGRP. You should always use a route map to filter these routes to ensure that EIGRP redistributes only the routes that you intend to redistribute.

How to redistribute routes in Cisco Nexus 7000?

Enables IS-IS. To inject routes from one routing domain into Open Shortest Path First (OSPF), use the redistribute command. To remove the redistribute command from the configuration file and restore the system to its default condition in which the software does not redistribute routes, use the no form of this command.