How far apart are cable clamps spaced when used with wire rope?

about six wire
Clips are usually spaced about six wire rope diameters apart to give adequate holding power. They should be tightened before the rope is placed under tension. After the load is placed on the rope, tighten the clips again to take care of any lessening in rope diameter caused by tension of the load.

What are Crosby clamps?

Top Definition. The “Crosby” wire rope clip is a galvanized fitting used to securely fasten wire rope or guy strand. It is extremely durable. The U bolt goes over the wire and the iron saddle is attached below. Then, the bolts are tightened and the guy wire is locked in place.

How big are the clips on Crosby wire rope?

The number of clips shown also applies to rotation – resistant RRL wire rope, 8 x 19 Class, IPS, XIP, sizes 1-1/2 inch and smaller; and to rotation-resistant RRL wire rope, 19 x 7 Class, IPS, XIP, sizes 1-3/4 inch and smaller. (918) 834-4611 to ensure the desired efficiency rating.

How big are Wire clamps for pulleys?

If a pulley (sheave) is used for turning back the wire rope, add one additional clip. The number of clips shown also applies to rotation – resistant RRL wire rope, 8 x 19 Class, IPS, XIP, sizes 1-1/2 inch and smaller; and to rotation-resistant RRL wire rope, 19 x 7 Class, IPS, XIP, sizes 1-3/4 inch and smaller.

What are the products of the Crosby group?

Our products of uncompromising quality include hooks, Red Pin® shackles, hoist rings, master links, lifting clamps, slings, turnbuckles, snatch blocks, crane blocks, sheaves, and a host of other custom-engineered solutions.

What makes Crosby stamping the best Stamping Company?

When you choose Crosby you are guaranteed more than superior products; you are guaranteed the quality assurance that comes with comprehensive risk management, world-class training programs, and a customer service and technical service team committed to exceeding expectations.