How do you reset the service light on a Mercedes Vito van?

Reset service light indicator Mercedes Vito

1. Turn the key to position 2in the steering lock and immediately press the KM button twice briefly.
2. Press and hold down the KM button.
3. Turn the key to position 2 in the steering lock.
4. Hold the KM button down for a further 10 seconds.

How do you turn off the engine management light on a Mercedes Vito?

The first way to reset a check engine light on your Mercedes-Benz is with a scanner. If you have one, simply plug it in, read the related codes, and press “clear” or “reset.” So long as the code issue has been resolved, it should go off.

How do you reset the service indicator on a Mercedes?

Press the “Down” button until you highlight “Service due.” Press the “OK” button. Press the “Down” button until you highlight “Full service.” Press the “OK” button. This should reset your service indicator light.

Where is the OBD port on a Mercedes Vito?

OBD connector location for Mercedes Vito – 639 (2003 – 2010)

1. OBD plug is under the steering wheel (left side)
2. remove the cover near pedals.
3. OBD Connector.

How do you turn off the engine management light on a Mercedes?

How to reset service indicator on Vito W639?

If you are reading this you may have been irritated by the huge number and range of methods described to reset the service indicator (ASSYST) on the 2008 (or thereabout) 111 Vito (W639).

How to reset service indicator on Mercedes Benz W639?

So here it is: If you have specifically a 2008 Vito 111 (W639) and your instrument pod is like this one below, with no steering wheel control buttons….. ….then the ‘tried and tested’ definitive instructions to reset the service indicator as extracted from the Mercedes Benz service manual is outlined below. Click here to view full size or download.

How to reset service interval on Vito 115cdi?

1. Turn key to position 2 2. Immediately press button M once 3. Within ten seconds turn key back to 0 4. Press button R and hold while turning key back to 2 5. Keep button pressed till you hear long beep and new service interval is displayed For comparison, this is what my dash looks like. I have a 639 111 CDI Van 2007 model.