How do you reset error F21?

Reset. When the “F21” error code appears, try pressing “Pause/Cancel” to stop the current wash cycle. If water remains in the washing machine tub, touch “Drain/Spin” to force a secondary drain cycle to remove the water. Once all the water drains, try selecting a new wash cycle and pushing “Start.”

How do I fix my Whirlpool F21 code?

Clogged drain into the sewer Lint, scraps of paper, small coins, socks – anything can block the drain at the junction of the hose and the sewer hole. The solution is to disconnect the pipe and clean the drain from foreign debris that prevents water from escaping, causing the F21 error code.

What does F21 mean on washer?

Long Drain Error
Error Code F21: Long Drain Error (If drain time takes longer than 8 minutes, the water valves will turn off.) Symptoms: The washing machine stops mid cycle. The door stays locked. The washing machine won’t drain the water out.

What does the code F21 mean on a whirlpool washer?

Whirlpool Washer Error Code F21 – DRAINING ERROR – How To Fix? The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out.

What is an F21 or F02 error code on my Maytag front load washer?

What is an F21 or F02 Error Code on my Maytag Front Load Washer? These error codes indicate that drain times are longer than expected. Here are some common issues: Is the drain hose kinked or clogged? Make sure the drain hose is not kinked or clogged.

What does an F21 or F02 error code mean?

These error codes indicate that drain times are longer than expected. Here are some common issues: Is the drain hose kinked or clogged? Make sure the drain hose is not kinked or clogged.

Why is my Maytag washing machine not working?

Washer won’t run or stops working mid-cycle. A power surge/interruption may cause this error. Unplug the washer for two minutes to reset the machine. Once the code is removed, restart the cycle by pressing the POWER button one time. If Code Persists, contact service professional.