How do I reset my zircon edge finder?

Zircon stud finders are designed to be as effortless as possible. Place the stud finder flat against the wall, press and hold the power button, and wait for 1-2 seconds. The tool automatically calibrates to the wall’s surface.

What does EDGE mean on a stud finder?

“Edge” light indicates when the tool is over a stud edge. Patented SpotLite® Pointer shines an arrow-shaped beam on the wall to mark the target. Zircon’s patented “over-the-stud” indication alerts user to start the scan in a new location if scanning begins over a stud.

What does it mean when a stud finder beeps red?

One common cause of a stud finder beeping is that it needs to be recalibrated. In that case, simply try to restart your pass along the wall to get a better reading. Some stud finders can also detect voltage and will beep to alert the user of live wires behind drywall.

How does the zircon studsensor edge finder work?

Description. The Zircon StudSensor ™ EDGE stud finder finds the edges of wood and metal studs behind walls. The easy-to-read display and patented SpotLite ® Pointer System clearly identify the edge of the target. The patented pivot pinch grip design allows for a comfortable, secure hold in either hand, at any angle.

How do I calibrate my zircon stud finder?

How do I calibrate my StudSensor™ or MultiScanner® stud finder? Zircon stud finders are designed to be as effortless as possible. Place the stud finder flat against the wall, press and hold the power button, and wait for 1-2 seconds. The tool automatically calibrates to the wall’s surface.

Why does my zircon stud finder keep blinking?

The flashing, or blinking, is most likely caused by a low battery condition. Please replace your battery with a brand new 9V alkaline battery with an extended expiration date at least 3 years out from the current date. Zircon stud finders require a robust, fully charged 9V alkaline battery to properly operate.

What does the green light mean on a zircon studsensor?

As you approach a stud, the red LEDs will light from bottom to top. The green LED will light, and a beep will sound when you’ve found the edge of a stud. Mark the edge of the stud when the green light indicates you’ve found it.